Two-Zone Thermal Shock Test Chamber

Product Detail

Bay Area Test Equipment Inc is one of the leading two-zone thermal shock test chamber manufacturers and suppliers, welcome to buy and wholesale cheap and best two-zone thermal shock test chambers from us.

BTS Series Two-zone Thermal Shock Chamber

Thermal shock chambers are capable of simulating environment of sudden and drastic changes in temperature; there are the ideal simulation test chambers suitable for testing the capability of a product, material or part component to withstand the stress and strain.

We supply two types of design to meet different industry requirements &standards. Two-zone thermal shock chamber means test sample is placed in the basket which can move up and down between high-temperature chamber and low-temperature chamber, and transferring is carried out in less than 1-3 seconds and the samples are subjected to thermal shocks as many times as necessary because the system has a standard setting of automatic defrosting.(But we recommend to do  defrost hand-operated after cold testing) Moreover, hot chamber and cold chamber can work independently and used as high and low temperature chamber to meet more testing requirements.

Schematic Diagram



Standard Features:

	* SUS304stainlesssteel+arcweldingseamlesswelding * Fireproof PU+ glass fiber wool insulationmaterial * Multi-layerglassobservationwindow+ Autoheating function * Full-opening +double wing type door+ 10,000 times tested lock * One F50mm portholescable port * Coatedfinishing (colorsavailable)or SUS304 * Adjustable feet andheavy-duty castors * High quality craftsmanship, modular design and construction
	* Water and electricity separation system * Fullsystemfunctionswitchesandindicatorlights * Allwiringcolorcodedandlabeled * Systemfaultstatusindicators * Over-temperatureprotectionandalarmswitch * Balancedloadon3phasepower * Powerleakageprotection * Overheatingprotection * Overpressureprotection * Overcurrentprotection
	* CFC free refrigerant, in line with international standards * Adopting international famous compressor ,parts and components * No condensation and no frost design * Coppertube/aluminumfincoolingcoilsavailable * Air/Watercooledcondenser * Highefficiencyplatetypeheatexchanger * Dualhigh/lowrefrigerationpressurelimitswitches * Overloadprotection for compressor
	* 7-inch color LCD touch screen * Operation mode: programmable/ singe point setting * Sensor:PT100 (electronic sensor input is optional ) * Communication interface(RS232/RS485) * Network solution, IP address can be set * Built-in detection, fault alarm, reminder function * USB interface * Alarm and show automatic message reminder

Model Features

Model name	Useful capacity(L)	Basket size (W×H×D mm)	Temperature range	Ramp range
BTS-50-2	50L	350×400×350	-80~+200?  -70~+200?  -55~+200?	-65?~+150?  -55~+150?   -40~+150?
BTS-80-2	80L	400×500×400
BTS-100-2	100L	500×500×400
BTS-150-2	150L	500×600×500
BTS-250-2	250L	600×700×600

Note

1.Average temp change rate between highest and lowest temperature without any load and heat dissipation, Refer to IEC60068-3-5 for more details)

2.Performance is measured in the ambient temperature of + 25? and sensors are placed at  the outlet of  air conditioning unit ;

3. Customized sizes and configurations are available.